From:	Mirmak, Michael
Sent:	Wednesday, March 01, 2006 4:18 PM
To:	'Alexander, Mark'; 'Angulo, John'; 'Chitwood, Sam'; 'Colin Warwick'; 'Dodd, Ian'; 'Girardi, Antonio '; 'Green, Lynne'; 'Huq, Syed'; 'Istvan Novak'; 'Katja Koller'; Muranyi, Arpad; Pandit, Vishram S; Powell, Jon N; 'Ross, Bob'; 'sanjeev_gupta@agilent.com'; 'Varma, Ambrish'; 'Vinu Arumugham'; 'Wang, Lance'; 'Wolff, Randy R. '; 'Wu, Shangli'; 'Yang, Zhiping'
Subject:	IBIS Cookbook/Futures Task Group Feb. 23 Minutes and March 2 Agenda
======================================================================
IBIS FUTURES/COOKBOOK TASK GROUP MEETING MINUTES
Date: February 23, 2006

http://www.eda.org/ibis/futures/
http://www.eda.org/ibis/cookbook/

Attendees:
----------
Agilent		      - Sanjeev Gupta
Cisco Systems           - Syed Huq
Intel                   - Michael Mirmak, Arpad Muranyi
Mentor Graphics         - John Angulo
Micron                  - Randy Wolff
Teraspeed               - Bob Ross

======================================================================

Next Meeting:
Thursday, March 2, 2006
9 AM - 10 AM US Pacific Time 


               Telephone     Bridge   Passcode
              916-356-2663     4      363-2517

Agenda:

9:00 - 9:10 AM     Opens

9:10 - 9:40 AM     Review of major issues list from IBIS 4.2 WIP
                   - referencing of V-t tables, Ramp load
                   - referencing of I-V tables and buffer delay loads
 
9:40 - 9:50 AM     Review of Cookbook changes proposed by Lynne Green
 
(time permitting)  ICM-IBIS BIRD review from M. Mirmak 

========================================================================
The meeting lasted only about 30 minutes, due to a minimal agenda.

In response to questions, Arpad noted that he was updating the IBIS 4.2
work-in-progress (WIP) document, and will note changes for review.  No
major technical changes are anticipated.  Comments from the attendees
are welcome.

Bob Ross noted that an ICM sample file has been provided by Samtec for 
public consumption.  Both Bob and John Angulo observed that this was a positive
development toward industry adoption of the standard.

Randy Wolff reported that the ICM specification was actually adopted by
ANSI, but that no formal announcement or notification had been received
by GEIA or IBIS.  A statement will be issued to the IBIS reflectors, SI-List
and relevant organizations.

ARs
------
Bob Ross  		- contact Samtec regarding web site mentions of ICM support
Michael Mirmak 	- confirm with Lance that the models web page will be updated
                    with relevant ICM model references